image:Panasonic × AI

Aug 08, 2023

Company / Press Release

Lowering the hurdles for introducing robotics

Panasonic Holdings Corporation Has Developed Technology to Streamline Motion Teaching for Robots

Osaka, Japan – Panasonic Holdings Corporation has developed a new technology that can teach robot motions that includes contact with the surrounding environment (doors, tables, and more), control parameters that achieve both performance that correctly completes the taught motion and safety during contact.

As the use of industrial robots advances, technology for efficiently programming robot movements is becoming more and more important. In particular, in environments involving contact with people and objects, movements that reduce the risk of contact while performing tasks accurately are required, but robot control that achieves both is known to be extremely difficult. Therefore, we have developed a method to efficiently program a robot assuming it behaves flexibly like a spring. We developed a novel method to learn stiffness parameters of inpedance control to satisfy both task performance and safety requirements by segmenting the motions taught to robots demonstrated by humans and multi-objective Bayesian optimization.

The advancedness of this technology has been recognized internationally, and it has been accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2023, a top conference for AI and robotics technology (having an acceptance rate of 43%).
It will be presented at the plenary session to be held in Detroit, Michigan in the USA from October 1 to October 5, 2023.

Overview:

Figure 1: Flow of learning impedance control parameters with the newly developed method. Photographs and segmentations illustrate the table wiping task done by an actual robot. Quoted from Fig. 1 of the accepted paper.

Direct teaching, in which humans directly teach robots movements, is widely used as a method of programming robot movements because of its simplicity. However, when a robot reproduces a taught action in an environment where there is contact with objects or where people or other robots cooperate or divide labor, it becomes necessary to deal with the risk of unforeseen contact in order to avoid damage to people, objects, or the robot itself, making it difficult to utilize robots for certain tasks.
In the field of control technology for flexibly moving robots, there is impedance control,*1 which mimics a virtual spring system and gives the robot flexibility like a spring. If an appropriate spring system parameter (impedance gain) is set, it is possible to reduce the risk of contact while having the instructed operation performed accurately.*2 However, with impedance control, there is generally a trade-off between safety and motion accuracy, and it is difficult to set an impedance gain that optimizes both at the same time.
Also, in order to achieve the desired task, it is necessary to accurately perform multiple consecutive actions. For example, in the case of opening a door, the robot must 1) approach the knob, 2) turn the knob, and 3) open the door. However, optimum impedance gain differs for each operation.

Therefore, as shown in Figure 1, we developed a method that first segments a series of motions being taught to facilitate parameter optimization, and then finds the optimal impedance gain for each segment using multi-objective Bayesian optimization.

Figure 2: Segmentation results for the door opening task performed using IC-SLD and the conventional method. Quoted from Fig. 4 of the accepted paper.

First, the newly developed task segmentation method IC-SLD (Impedance Control-aware Switching Linear Dynamics) assumes that a series of demonstrated motions is generated by multiple combinations of spring system motion equations assumed by impedance control, and defines this as the problem of inferring the unknown impedance gain and the switching time of the equation. IC-SLD solves this problem by minimizing the error between the predicted trajectory and the actual taught trajectory. Compared with conventional methods (e.g. GMM*3 or SLD*4), IC-SLD realized segmentation suitable for optimization. (Figure 2: Results of task segmentation in door opening task using IC-SLD and the conventional method)
Subsequently, the impedance gain is explored through Bayesian optimization*5 using prior knowledge. Since IC-SLD also outputs an estimated value of the impedance gain, using this as a solution candidate makes optimization more efficient. By applying Bayesian optimization π-BO [Hvarfner+,ICLR2022] that is able to make use of prior knowledge, optimal impedance gains that simultaneously optimize task performance (the cumulative sum of reward functions) and safety indices (the cumulative sum of stiffness parameters) are searched while repeating robot motion trials.

Experiments on simulated tasks and a real robot demonstrated that our method allows for learning the impedance gain in a shorter time than the conventional method. (Figure 3)

Figure 3: Learning results of impedance gain in simulation and actual equipment using the newly developed method. The horizontal axis is the number of trials, and the vertical axis is an index that combines task performance and safety. Quoted and processed from Fig. 3 and Fig. 8 of the accepted paper.

Future outlook:

The newly developed robot teaching technology accelerates the use of robots in environments where they collaborate with human. We will continue to accelerate the social implementation of AI and robotics, and promote the research and development of AI technology that contributes to our customers' lives and work sites.

Notes:

*1: Impedance control is a control method that adjusts the apparent mechanical impedance (inertia, damper, stiffness) against external forces by assuming that the robot follows a virtual spring system.

*2: As an example, in the door opening task shown in Figure 2, there is a risk of damage being done to the door as the robot positions its arm, such as the handle may be rotated excessively due to positional deviation due to control errors, or the handle may be pulled in a different direction due to the robot being misaligned with respect to the door. On the other hand, with impedance control, the flexibility of the spring can reduce the above risks.

*3: Segmentation based on clustering by GMM (Gaussian Mixture Model).

*4: SLD (Switching Linear Dynamics) Segmentation assuming that the motion being taught is generated by a combination of simple linear equations.

*5: Bayesian optimization: A method of learning the shape of an unknown function from data and trying to estimate the optimal solution for that function with as little data as possible.

Related Information:

“Learning Compliant Stiffness by Impedance Control-Aware Task Segmentation and Multi-Objective Bayesian Optimization with Priors”, to appear in IROS 2023
https://arxiv.org/abs/2307.15345
This research is a result of a collaboration between Masashi Okada, Ryo Okumura of Panasonic HD Technology Division, Mayumi Komatsu of Panasonic HD Manufacturing Innovation Division, and Professor Tadahiro Taniguchi of Ritsumeikan University/Panasonic HD Technology Division.

– IROS 2023 official website https://ieee-iros.org/

– Panasonic×AI website https://tech-ai.panasonic.com/en/

– Robotics Hub website https://tech.panasonic.com/global/robot/

About the Panasonic Group

Founded in 1918, and today a global leader in developing innovative technologies and solutions for wide-ranging applications in the consumer electronics, housing, automotive, industry, communications, and energy sectors worldwide, the Panasonic Group switched to an operating company system on April 1, 2022 with Panasonic Holdings Corporation serving as a holding company and eight companies positioned under its umbrella. The Group reported consolidated net sales of 8,378.9 billion yen for the year ended March 31, 2023. To learn more about the Panasonic Group, please visit: https://holdings.panasonic/global/

The content in this website is accurate at the time of publication but may be subject to change without notice.
Please note therefore that these documents may not always contain the most up-to-date information.
Please note that German, French and Chinese versions are machine translations, so the quality and accuracy may vary.

Issued:
Panasonic Holdings Corporation

Downloads (Images)

Featured news